NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose, or missing bulbs. Replace bulbs
promptly with the replacement bulbs provided in order to
maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug the
power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off
button.
Press the selector button on the “Dual Color Light Controller”
or “Remote Controller” to select among:
(1) CLEAR AND MULTI-COLOR ALTERNATING;
(2) CLEAR LIGHTS;
(3) MULTI LIGHTS;
(4) TURN OFF BOTH LIGHTS.
Operation
Turning on the tree
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER
AND REMOTE CONTROL:
This tree package includes hinge pins, washers and bulbs for any
replacement or repair that you need to perform on your tree. If
extra parts are needed, contact the Customer Service Team at
1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday
through Friday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the bracket
and secure with a washer.
Maintenance
Spare parts
1. Before using or reusing, inspect product carefully. Discard any
products that have cut, damaged or frayed wire insulation or
cords, cracks in the lampholders or enclosures, loose
connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all
ornaments and decorations.
3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product from
wherever it is placed, including tree,
branches, or bushes, to avoid any
undue strain or stress on the
product conductors, connections,
and wires. Cover the protective cap
on the poles to avoid damaging the
internal parts.
6. When not in use, store neatly in a cool, dry location protected
from sunlight.
Use and Care Instructions
Troubleshooting
User servicing instructions
Light
Controller
Selector
Button
Remote
Controller
Problem Solution
The tree does
not light
Ensure that all tree sections are
plugged into each other and that the
tree is plugged into the wall. If your
tree came with a foot pedal, step on
the On/Off button.
Check for blown fuses at the light string
and power cord plugs. Replace as
needed with the replacement fuses
provided.
Check for loose, broken, or missing
bulbs and replace as needed with the
replacement bulbs provided
Safety Information
Christmas Tree
Model# TG76P3945D04
Sku # 1000 862 590
Note: For the remote controller, replace only with CR2032
battery. See bottom of the remote controller for replacement
instruction.
CAUTION:
Use only power adaptor that was
provided with this product. Using a different power
adaptor will damage the lights and cause fire, electrical
shock hazard.
CAUTION:
Do Not Mix Old And New Batteries.
Do
not mix alkaline, carbon-zinc, lithium, or re-chargeable
(Nickel-Cadmium or other types) batteries.
Use only
batteries of the same or equivalent type as recommended.
Remove all batteries when replacing. Do not dispose of
batteries in fire. Batteries may explode or leak.Batteries are
to be inserted with the correct polarity. Exhausted batteries
are to be removed from the toy. The supply terminals are
not to be short-circuited. Do not dispose of this product as
unsorted municipal waste. Collection of such waste
separately for special treatment is necessary. Do not ingest
batteries. Keep away from children.