Christmas Tree
Model: TG76M2X88L00
Sku # 1002 469 164
Color Selection
Buttons
Power (ON/OFF)
Modes
Options
1. Press button to turn the lights ON/OFF.
2. Press color selection button for your preferred color.
3. Cycling Press button to get different light modes:
• flash
• strobe
• fade
• smooth
1. Loose the screws and detach the back cover.
2. Push the battery, and take it out alone with the arrow direction.
3. Install another new CR2025 battery.
4. Install the back cover and screws to front cover. Make sure the
screws are all tightly fastened.
5. Test the function, and see if it works.
NOTE: Air-dry Remote Controller if it gets wet.
Screw
Battery
CR2025
Front
Cover
Back
Cover
Operation Instruction Of Remote
Controller
Battery Replacement Of Remote
Controller
CAUTION:
Use only power adaptor that was provided
with this product. Using a different power adaptor will damage
the lights and cause fire and electrical shock hazard.
Troubleshooting
Troubleshooting
Problem Solution
The tree does
not light
Ensure that all tree sections are
plugged into each other and that the
tree is plugged into the wall. If your
tree came with a foot pedal, step on
the On/Off button.
Trouble Shooting Tips
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected
and power cord is plugged into the wall outlet. (If the tree
comes with a foot pedal, try stepping on the on/off button).
2. Turning the poles gently to make sure thepole to pole-to-pole
connection is in place.
3. Check for loose connection between light string plugs and
extension cords.
4. Manually operate the button on Control box to eliminate
Remote Controller issues.
Loose Hinge Pin
1. Extra hinge pins are included for repairing the hinges. Place
the branch into the slot of the
bracket.
2. Insert a new hinge pin through
the hole and secure using the
retainer washer. (See Fig. D)
Fig.D
1.
WARNING:
SMALL PARTS, KEEP AWAY FROM CHILDREN.
2. Do not expose light set to moisture.
3. Remove batteries when not used for an extended period of
time, or when depleted.
4. Dispose of used batteries properly by following directions on
batteries.
5. Use only (CR2025) batteries for the remote controller.
6. Clean the battery contacts prior to battery installation.
7. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE
OR LEAK.
Warning:
