7
INSPECTION
Before each use, check unit for any cracks in the enclosure, remote control, cords and
plugs. Make sure there are no exposed wires. Do not use if any of the above conditions are
found.
CLEANING
Should you experience low fog output after many hours of continuous operation or after
the machine has been idle or in storage for a long time, it is recommended to run a
cleaning solution through the system to prevent the accumulation of particles in the
heating element.
a. While the unit is unplugged and cool, empty all Fog Liquid from the machine and
replace with a fog machine cleaning solution in the tank. Plug unit in and allow to warm
as usual.
b. Run unit in a well-ventilated area until tank is empty.
c. Cleaning is now complete.
All fog machines are prone to clogging due to the consistency of Fog Liquid and the high
temperatures at which it vaporizes. However, a well maintained machine should provide
years of reliable use.
STORAGE
It is important to remove all fluid from the unit when storing for an extended period of time.
1. When the unit is unplugged and cool, empty all Fog Liquid from the machine. Plug in unit
and allow to warm as usual.
2. Run unit in a well-ventilated area for 10-seconds to confirm tank is empty and dry.
3. Store on a flat, level surface. Keep in a well-ventilated, cool and dry location.
For best performance, operate unit for 10-minutes every 3 months. Follow the Operation
Instructions and storage instructions accordingly.
04252019_2008693
MADE IN CHINA
