ASSEMBLY
1 Assembling the Body of Bat to the Base Stand
Place all the parts flat on the ground. Insert the connecting rods on the
bottom of Bat's Body (A) into the matching connecting holes on the
Base Stand (C) and fasten at the connecting loop with Plastic Ties (F).
Insert each hooked end of the Support Bar (D) into the matching
connecting holes on the Head of Bat and the Base Stand (C)
respectively then secure with the Cotter Pins (E).
2 Assembling the Wings of Bat
Insert the connecting rods on the Wings of Bat (B) into the matching
connecting holes on the Bat's Body (A) then secure with the Cotter
Pins (E).
3 Fasten the Bat's Body and Wings
Fasten the Bat's Body (A) and Wings (B) together with the Plastic Ties
over the adjoining metal frames (F).
4 Assembling the Ground Stakes
Place the 4 Ground Stakes (G) over the 4 Corners of the Base Stand then
firmly into the ground.
A
C
E
F
D
B
A
E
A
B
F
G
