Safety Information
Pre-Operation
IMPORTANT SAFETY
INSTRUCTIONS
BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
WHEN USING ELECTRICAL PRODUCTS, INCLUDING THE
FOLLOWING:
WARNING:
ELECTRIC PRODUCT.
Keep away from children. Not
recommended for children under 3 years of age. As with
all electrical products, precautions should be observed
during handling and use to reduce the risk of electric shock.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard. To avoid the risk of electrical shock,
always make sure the figure is unplugged from the electrical
outlet before assembling, disassembling, or relocating.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
a. This is an electrical product - not a toy! To avoid risk of fire,
burns, personal injury, and electric shock, it should not be
played with or placed where small children can reach it.
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are used
in outdoor applications, connect the product to a Ground
Fault Circuit Interrupting (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.
c. This seasonal use product is not intended for permanent
installation or use.
d. Do not mount or place near gas or electric heaters, fireplaces,
candles, or other similar sources of heat.
e. Do not secure product wiring with staples or nails or place
on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
h. Do not use this product for other than its intended purpose.
i. Do not hang ornaments or other objects from cord, wire, or
light string.
j. Do not close doors or windows on the product, or extension
cords, as this may damage the wire insulation.
k. Do not cover the product with a cloth, paper, or any material
not part of the product when in use.
l. Do not place the product against carpeting, furniture, or any
other fabric when in use.
m. This product has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock.
This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If the plug still
does not fit, contact a qualified electrician. Do not use an
extension cord unless the plug can be fully inserted. Do not
alter or replace the plug.
n. This product employs overload protection (fuse). A blown
fuse indicates an overload or a short-circuit condition. If the
fuse blows, unplug the product from the outlet. Also unplug
any additional string or products that may be attached to
the product. Replace the fuse as per the user servicing
instructions (follow product markings for proper fuse
rating) and check the product. If replacement fuse blows,
a shortcircuit may be present and the product should be
discarded.
o. Read and follow all instructions that are on the product or
provided with the product.
SAVE THESE INSTRUCTIONS
INFLATABLE
INSTRUCTIONS
CAUTION:
Do not attempt to inflate this unit
during unusually strong winds. If it becomes too windy for safe
operation, allow the unit to deflate and wait for safer conditions.
CAUTION:
To reduce the risk of fire do not
deliberately reposition either lamp holder contact. Do not
attempt to inflate your Airblown
®
Inflatable during unusually
strong winds. If it becomes too windy for safe operation, simply
allow your Airblown
®
Inflatable to deflate and wait for better
conditions before re-inflating. Protect the electric fan and
power cord from direct exposure to water. This precaution will
reduce the risk of electrical shock. When the temperature is
below 14° F (-10° C), the motor may temporarily stop running.
The motor will begin functioning again higher temperatures.
WARNING
Remove all plastic fasteners and tags.
These are part of the packaging and should be discarded.
This item is not a toy and should be used for decorative
purposes only.
For indoor and outdoor use.
120 V 60 Hz.
CAUTION
1. For temporary (90 days maximum) installation and use only.
2. To reduce the likelihood of excessive heat and possible da-
mage, use only decorative lamp accessories packaged with
this product.
3. Always unplug this product before installing or replacing fu-
ses and/or lamps.
4. Replace only with same type C7, 0.9 Watt Max candela-
bra-base UL Classified Lamps.
TM
Fuse Replacement
WARNING:
Risk of Fire:
Replace only with same
size and type of fuse. Do not replace the attachment plug.
Contains a safety device (fuse) that should not be removed.
Discard product if attachment plug is damaged.
1. Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on the cord.
2.
Open fuse cover. Slide open the fuse
access cover on top of the attachment plug
towards blades. (See illustration)
3. Remove fuse carefully.
4. Replace fuse only with 5 Amp Max, 125
Volt (provided with product).
5. Close the fuse cover. Slide closed the fuse access cover on
top of the attachment plug.
Replacing the bulb(Not included)
CAUTION:
To reduce the risk of overheating,
replace burned-out bulbs promptly. Only use C7, 0.9-Watt Max
Candelabra-base 120 Volt UL-Classified bulbs.
CAUTION:
Unplug the unit and allow the bulb to
completely cool before you replace the bulb. Do not touch the
bulb when the power is On. The bulb is extremely hot.
Replacing the bulb
Step 1. Grasp the plug and remove it from the receptacle. Do
not unplug by pulling on the cord.
Step 2. Open the zipper on the inflatable unit.
Step 3. Open the protective bulb cover carefully by pressing
down on the two locking side tabs simultaneously.
Step 4. Remove the bulb from the socket and replace.
Step 5. Do not over-tighten the lamp as this may damage the
lamp or lamp holder.
