ASSEMBLY
1 Assembling the Legs to Body of Deer
Insert the connecting rods on the Front and Hind Leg of Deer (E,F) into
the connecting holes on the underside of the Body of Deer (D) and
fasten over the metal frame with Plastic Ties (U). The Legs come with
metal bars attached to stabilize the Deer. Insert the hooked end of the
metal bars into the metal hole on the opposite Leg.
2 Assembling the Head/Neck to Body of Deer
Insert the connecting rods on the bottom of the Head/Neck of Deer (C) into
the connecting hole on the front of the of Body of Deer (D) and fasten at
the connecting loops with Plastic Ties (U).
3 Assembling the Antlers, Ears & Tail to Body of Deer
Insert the connecting rods on both Antlers and Ears (A,B) into the
matching connecting holes at the top of Head/Neck of Deer (C). [Note:
The ears go to the outside of the Antlers]. Insert the connecting rod on
the Tail (G) into the connecting hole at the rear of Body (D).
4 Assembling the Ears to Head/Neck & Tail to Body of Baby Deer
Insert the connecting rods on the Head/Neck of Baby Deer (N) into the
connecting holes on the Body of Baby Deer (P) and fasten at the connecting
loops with Plastic Ties (U). Insert the connecting rods on both Ears of Baby
Deer (O) into the connecting holes on Head/Neck of Baby Deer (N). Insert
the connecting rod on the Tail of Baby Deer (Q) into the connecting hole at
the rear of the Body of Baby Deer (P).
5 Assembling the Legs to Body of Doe
Insert the connecting rods on the Front and Hind Legs of Doe (K,L) into
the connecting holes on the underside of Body of Doe (J) and fasten
over the metal frames with Plastic Ties (U). The Legs come with metal
bars attached to stabilize the Doe. Insert the hooked end of the metal
bars into the metal hole on the opposite Leg.
6 Assembling the Ears to Head/Neck & Tail to Body of Doe
Insert the connecting rods on the Head/Neck of Doe (H) into the
connecting holes on the Body of Doe (J) and fasten at the connecting
loops with Plastic Ties (U). Insert the connecting rods on both Ears of
Doe (I) into the connecting holes on the Head/Neck of Doe (H). Insert
the connecting rod on the Tail of Doe (M) into the connecting hole at the
rear of Body of Doe (J).
7 Assembling the Bow Ties
Insert the wires on the backside of the Bow Ties (R) through the material
on the bodies then twist the wires together to secure.
8 Assembling the Ground Stakes
Place the Ground Stakes (V) over the metal frame at each hoof of the Deer,
Doe and Baby Deer then into the ground.
U
E
F
D
D
U
C
C
A
B
G
D
Q
P
N
O
U
L
U
K
J
M
H
U
J
I
R
V
