ASSEMBLY
1 Assembling the Support Frame and Hind Legs to the Body
Insert the connecting rods on the Support Frame (G) and the Hind Legs
(F) into the connecting holes at the bottom of the Body (D) and fasten at
the connecting loops with Plastic Ties (L).
2 Assembling the Head and Front Legs to the Body
Insert the connecting rods on the Head/Neck (C) and the Front Legs (E) into
the connecting holes of the Body (D) and fasten at the connecting loops
with Plastic Ties (L).
3 Assembling the Antlers, Ears and Tail
Insert the connecting rods of the Antlers & Ears (A,B) into the
connecting holes at the top of the Head (C). Insert the connecting rod
on the Tail (I) into the connecting hole on the rear of the Body (D).
4 Assembling the Bow Tie
The Bow Tie (H) comes with a wire tie on the back side. Feed the wire tie
through the holes of the body then twist the wires together to secure.
5 Assembling the Ground Stakes
Insert Ground Stakes (K) over the metal frame of each hoof then into the
ground firmly.
F
G
L
L
D
L
C
D
E
A
B
I
C
D
H
K
