ASSEMBLY
1 Assembling the Branches to the Upper Sections
NOTES: Place the Sections of the Ghost Tree down on the ground.
Each Upper Section (B, C, D) has branches attached. Insert the
connecting rods at the bottom of each branch into the connecting holes
on the top of each Upper Section (B, C, D) then fasten together at the
connecting loops with the Plastic Ties (J). Use the diagram of the
finished Tree on this Assembly Sheet as a reference to place the
branches on each Upper Section. The branches are connected to the
Upper Sections (B, C, D) by the lighting string that runs throughout each
section.
2 Assembling the Upper Middle Section to the Lower Base
Section
Insert the connecting rods on the bottom of the Upper Middle Section (B)
into the connecting holes on the top of the Lower Base Section (A) then
fasten together at the connecting loops with the Plastic Ties (J).
3 Assembling the Lower Base Section to the Base Stand
Insert the horizontal connecting rods on the bottom of the Lower Base
Section (A) into the connecting holes on the Base Stand (G) then fasten
together at the connecting loops with the Plastic Ties (J).
4 Attach the Stabilizing Bars to the Upper Middle Section
and Base Stand
Attach the sections of the Stabilizing Bar (E, F) together and lock with built in
locking pin. Insert the end connecting rod on the upper Stabilizing Bar (E)
into the matching connecting hole on the back of the Upper Middle Section
(B) then secure with the Cotter Pin (K). Insert the end connecting rod on the
lower Stabilizing Bar (F) into the Base Stand (G) then secure with the Cotter
Pin (K).
5 Stand the assembled sections A & B upright on the Base
Stand
Stand the assembled sections A & B to an upright standing position.
6 Assembling the branches to the Upper Left and Right
Sections then to the Lower Base Section
Insert the connecting rods on the bottom of the Right and Left Upper
Sections (C, D) into the connecting holes on the top of the Lower Base
Section (A) then fasten together at the connecting loops with the Plastic
Ties (J). Secure the Upper Sections (B,C,D) together with the Plastic
Ties (J) at the connecting loops per the diagram below.
7 Assembling
the
Anchoring
Strings and Ground Stakes
This product includes heavy duty Anchoring Strings (L) and large plastic
Ground Stakes (M) to secure to ground. Hook the plastic clip end of each
of Anchoring Strings (L) onto the metal loop on the Upper Middle Section
(B) per the diagram below. Attach the looped end of the Anchoring String
(L) to the top clip on the Ground Stakes (M). Pull the Anchoring Strings
with Stake attached tightly out and away from the Tree evenly at 4
corners then insert the Stake firmly into the ground. With the remaining
4 Ground Stakes (M) secure the top clip to the Base Stand at 4 corners
then into the ground firmly.
D
B
C
J
A
B
J
B
A
J
G
A
B
G
E
K
F
K
A
B
G
D
G
J
A
B
C
J
B
M
L
L
M