Christmas Tree
Model: 21PG90173
Sku # 1006 224 636
Step 1.
Grasp the power adapter or power cord plug,
and than unplug from the power outlet.
Do not pull the power cord.
LAMP REPLACEMENT
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base
straight out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
(Reference figure only)
This tree package includes hinge pins, washers and bulbs for any
replacement or repair that you need to perform on your tree. If extra
parts are needed, contact the Customer Service Team at
1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday
through Friday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the
bracket and secure with a washer.
Maintenance
Spare parts
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose, or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug
the adapter into a wall outlet.
Operation
1. Before using or reusing, inspect product carefully. Discard any products
that have cut, damaged or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all ornaments
and decorations.
3. Gently lift the tree top straight up to remove from the center section and
fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. Carefully place all tree sections into a shipping box and tape it shut.
6. When not in use, store neatly in a cool,
dry location protected from sunlight.
Use and Care Instructions
CAUTION:
Use only power adapter that was provided with this product. Using a
different power adapter will damage the lights and cause fire, electrical
shock hazard.
Troubleshooting
Problem Solution
The tree does
not light
Ensure that all tree sections are plugged into
each other and that the tree is plugged into
the wall.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided
TM
Not Full?
Spread Branches
Run Extension Cord
Tree Topper?
Other Issue?
1-877-527-0313
Light Section Out?
Connect Plug Between Sections
No Lights Working?
Check For Loose Connection
Branch Hanging Low?
Bend up
