Step 5. Allow branches to fall into place or gently pull branches up and out.
When adjusting branches be sure that all wires are free of branch
hinges. (See Fig. 5)
Step 6. Shape the branches. Starting with tips closest to the pole, shape
one tip to the right, one to the left and one at the center of the main
stem. Repeat pattern for each branch. (See Fig. 6)
Step 7. Plug the well-connected power supply cord from the bottom
section (C) into electrical outlet. Please note this tree comes
with an on/off foot pedal switch for easy illumination.
Operation
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose, broken
bulbs and /or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and life
expectancy of your tree.
Step 1. Connect each tree section well and plug the power cord into a wall
outlet.
Maintenance
Fuse Replacement
A) Extension cord fuse replacement (1 replaceable 5 A, 125 V fuse is
located in the plug):
Note: This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug.
1. Grasp plug and remove from its power source.
2. Locate blown fuse by sliding access cover on top of
plug towards prongs.
3. Remove blown fuse by turning the plug over. Fuses should fall into
your hand (gentle tapping may be required).
4. Locate spare replacement fuse included in plug.
5. Insert spare replacement fuse. Close fuse cover by sliding fuse access
cover towards the cord.
CAUTION:
To reduce risk of fire – replace fuse in extension
cord with only 5 A, 125 V fuse. Do not replace attachment plug. Discard
product if the attachment plug is damaged.
B) Fuse replacement of the plug fixed on bottom section
(C):
1. Grasp power supply plug and
remove from its power source.
2. Locate the plug fixed on bottom
section (C). Slide access cover on
top of plug towards prongs.
3. Remove blown fuse.
4. Locate spare replacement fuse provided with product.
5. Insert spare replacement fuse. Close fuse cover by
sliding fuse access cover back.
CAUTION
: To reduce risk of fire – replace fuse in plug fixed
on bottom section (C) with only 3 A, 125 V fuse. Discard product if the
attachment plug is damaged.
Replacing the bulbs
1. Grasp plug and remove from its power source.
2. Unlock the lamp lock on the socket of the bulb.
3. Pull bulb AND plastic base straight out of socket. Do not twist bulbs
while you are removing them.
4. Replace burnt out bulb with 2.5 V, 0.425 W bulb ONLY. (Additional
bulbs are included for your convenience.)
5. Relock the lamp lock on the socket of the bulb.
If the new lamp base does not fit in lampholder, follow these steps:
a) Remove the base of burned out lamp by straightening lamp leads and
gently pull lamp out.
b) Thread leads of new lamp through holes in old
base with one lead in each hole.
c) After lamp is fully inserted into ase, bend each
lead up, like other lamps in the light set so that the
leads will touch the contacts inside the lampholder.
CAUTION! –
ALWAYS UNPLUG YOUR TREE FROM ITS
POWER SOURCE BEFORE ATTEMPTING FUSE AND BULB
REPLACEMENT.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the plug cord from the wall outlet. And remove your power
supply cord with an on/off foot pedal switch from bottom section
(C) and save it.
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
UL Model No. TMH7-5(1.7)
Problem
Solution
The tree
does not
light
Ensure that all tree sections are plugged into each
other and that the tree is plugged into the wall outlet.
Check for blown fuses at the extension cord plug and
the plug fixed on the bottom section (C). Replace as
needed with the replacement fuses provided.
Check for loose, broken, or missing bulbs and replace
as needed with the replacement bulbs provided.
If you are still experiencing problems with the tree
please call 1-877-527-0313 for instructions.
Troubleshooting
