Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a)
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 0.4 A 120 V 60
Hz.
c) This seasonal use product is not intended for permanent installation or
use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or
other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night,
or if left unattended.
h) This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.
I) Do not cover the product with cloth, paper or any material not part of the
product when in use.
m) This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
the product from the outlet. Also unplug any additional strings or products
that may be attached to the product. Replace the fuse as per the User
Servicing Instructions (following product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit may
be present and the product should be discarded.
n) This product is equipped with push-in type lamps. Do not twist lamps.
o) This product has a polarized plug (one blade is wider than the other) as
a feature to reduce the risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not use with
an extension cord unless plug can fully inserted. Do not alter or replace
the plug.
p) Read and follow all instructions that are on the product or provided with
the product.
q)
SAVE THESE INSTRUCTIONS.
Pre-Assembly
Package Contents
Part
Description
Quantity
A
Tree top
1
B
Tree center
1
C
Tree bottom
1
D
Tree stand
1
E
Power supply cord with a
foot pedal switch
1
7.5' Warm White/Multi LED Color Changing
self Shape One Plug Tree
SKU# 1001302140
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Open the stand to a 90 degree angle until the hole lines up with the
hole on the tube.
Step 3. Screw an eye bolt into the hole.
CAUTION! –
ALWAYS UNPLUG YOUR TREE
FROM ITS POWER SOURCE BEFORE ASSEMBLING OR
DISASSEMBLING.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Insert tree bottom (C) into the tree stand (D) and tighten the screw.
(See Fig. 1)
Step 2. Insert tree center (B) into the tree bottom (C). (See Fig. 2)
Step 3 Insert the tree top (A) into the tree center (B). (See Fig. 3)
Step 4. Connect the end connector of power cord with foot pedal switch
(E) with the connector found on the bottom section (C) in correct
direction (always match the connection on the end connector of
power cord to the concave on the connector found on the bottom
section (C) according to the magnified drawing on Fig. 4.
Step 5. Allow branches to fall into place or gently pull branches up and out.
When adjusting branches be sure that all wires are free of branch
hinges. (See Fig. 5)
Step 6. Shape the branches. Starting with tips closest to the pole, shape
one tip to the right, one to the left and one at the center of the
main stem. Repeat pattern for each branch. (See Fig. 6)
Step 7. Plug the well-connected power supply cord from the bottom
section (C) into electrical outlet. Please note this tree comes
with a foot pedal switch for changing functions. This tree is
Color Changing, the 8 lighting options available are:
1.
Steady Warm White
2.
Flashing Warm White
3.
Slow Fade Warm White
4.
Steady Multicolor
