Loosen the height fixing knobs on both sides of the workbench (Please see
Fig3), and fix the workbench with a leg as picture shows, then keep
pushing the knobs on both sides simultaneously and lifting the worktop, it’s
the way you can open the workbench. (Please see Fig4,5,6)
Insert the handles (#2) in the rod, align the holes, fix the handle with
Bolt M5x20mm and locknut M5(#3). (Please see Fig.7,8,9,10)
Fig.3
Fig.6
Fig.5
Fig.4
PUSH
II. Handle assembly steps
Before assembly you will require the following tools
Spanner 8-10 mm (Not included)
Phillip screwdriver (Not included)
Fig.7
Fig.8
Workbench
-4-
