HOMCOM 920-077V70, Руководство по сборке и инструкция

Страница: 13 / 23

-12-
The useage of cable tie clamps.
1.The surface must be clean, uniform, and dry.
Do not use it on concrete, rough, or loose surfaces.
2.Carefully remove the body paper when using it,
then quickly place the product in the proper position
and press it firmly to maintain complete contact.
3.The pasted product is affected by the size of the bottom area,
temperature and pressure holding time.
4.The normal adhesive temperature is (8 ° C -32 ° C),
please try not to use it at a lower temperature, to avoid that
the paste will be too hard to get wet effectively.
5.After the product is pasted, please do not use it immediately.
When the product is naturally placed for 5-10 hours, the effect
will be better the next day. When the product is stored,
it should be tightly sealed. Otherwise, the 3M glue will fail over time.
x3
Under the desktop board Inside the slot
K