STEAM IRONING
Filling Water tank
- Check that the plug is disconnected from the socket.
- Put the water tank
（
07
）
out of the main body [Fig. 1].
-Open the Filler cap (04).
- Fill distilled or purified Water by cup, be careful not to exceed
Max position (about 140 ml) [Fig. 2].
-Close the Filler cap.
-Put the water tank on the main body
Start Ironing
- Plug in POWER. [Fig. 3]
- Put the plug in the socket. Push the Switch button
（
11
）
- The steam brush starts to heat, and the indicator light start
flashing in blue around for 15 seconds.
- When the heating is completed, the indicator light stops flashing
and keep in blue.
- Press the steam button (03) to release the steam. If you need to
continue to release the steam, you can push the steam button (03)
3 seconds. [Fig. 4].
-The product has two level steam, if you need lower steam, press
the switch button (11) once, the indicator light becomes green.
Warning:
In the heating process, the indicator is still flickering.
Pressing the steam button at this time can't RELEASE steam.
Only after the heating is completed, the steam CAN be release.
This is Controlled by electronic.
THE USE OF STEAM BRUSH
-Brush fasten with the hook on the front of the appliance caught
the tail off [Fig. 5]
-Fold up the steam brush. [Fig. 6]
HOW TO PUT IT AWAY
- Unwatering by turning the water tank upside down and gently
shaking it.
- Cool the steam brush completely.
- Roll up the power cord
EN
