1.The temperature controller can regulate room temperature.Turn the temperature control-
ler clockwise to increase the temperature; turn it anti-clockwise to reduce the temperature
until appropriate temperature is reached.
2.Power switch is pressed switch:
a>With power switch
Ⅰ
pressed, indicates Level
Ⅰ
power.
b>With power switch
Ⅱ
pressed, indicates Level
Ⅱ
power.
c>With both power switch
Ⅰ
and
Ⅱ
pressed, indicates Level
Ⅲ
power.
3.The case when you will no longer use the oil-heater, press the power button to initializ-
tion Position, Turn the temperature Knob into the minimum position and take off the Plug.
Note: the warmer operates via heat elimination of heat conduction oil, and the oil cools out
slowly after the warmer is turned off, so do not move the warmer unless the oil has cooled
out, and move the warmer with the handle.
Cleaning
1.Please disconnect power supply before cleaning.
2.Wipe the outside of the warmer with wet cloth at first, and then dry it with a piece of soft
cloth.
Do not use wax or brush polish, since these will react with the warmer, resulting in discol-
oration.
Safety protection
1. Do not cover the warmer during operating, otherwise it will result in fire.
2. The warmer should be away from the wall or other flammable objects such as furniture,
curtain, bed sheet or clothes at least 90cm.
3. Do not disassemble radiation fin.
4. Take care of your children when they are near or use the warmer.
5.Do not let power line contact damp or hot objects; do not wind or let child come near the
power line.
6.Do not use the warmer in open air.
7.Do not let the warmer contact hot gasoline or electric burner.
8.Do not use damaged wire or plug; do not use damaged warmer unless it is repaired.
3