Installation
:
* When using stand unit, put the feet into the fix holes at the bottom of the unit.
And then attach with the screws. Place the unit securely on a flat surface
* When using wall mount unit, before drilling the wall make sure the area is free of
electrical wires or pipes. To mount your heater to the wall, use the appropriate
screws. Reference as the pictures below:
* If there has ceiling or any articles on top of unit, the distance should be bigger
than 600mm. The small distance will cause distortion and fire.
Notes:
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the
appliance.
3. The heater must not be located immediately below a socket-outlet.
4. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid a hazard.
5. Cover the appliance or incorrect placement will cause the fire. Do not cover
and using convert direction.