HOMCOM 800-078, Инструкция по сборке

Страница: 6 / 22

Coffee Maker
Page 5 of 21
BEFORE FIRST USE
Cleaning and priming the unit prior to first use.
Please refer to
the “Know your Appliance” section and familiarise yourself with the product and
identify all parts.
1. Please make sure the unit is on the
off “O” position by pressing the switch located on the side
of the unit. Ensure it is unplugged from the electrical outlet.
2. Remove stickers and labels from the unit.
3. Firstly, remove and wash the water tank, the milk tank, and the two filters, the pressurised
funnel and coffee scoop in a mixture of mild detergent and warm water. Rinse each part
thoroughly and place them back into the unit.
4.
Refer to the instructions on “PLACING THE PORTA-FILTER” section before placing or
removing the filter from the unit.
5. To clea
n the inside of the appliance, follow the steps listed on the “PREPARING
CAPPUCCINO” section using water in both reservoirs and no coffee in the filter. Do not
immerse the appliance in water or attempt to reach any of its internal parts.
6. NOTE: For your unit to work properly please clean it after every use.
IMPORTANT
– PRIME THE UNIT
To prime unit, run the steam cycle for 90 seconds by following the steps below:
1. Fill water tank between th
e “Min” and “Max” levels.
2. Fill the milk tank
with water between the “Min” and “Max” levels.
3. Select one of the filters and place it on the pressurised funnel. Place the pressurized funnel
in the unit ensuring it is properly locked and place a cup under it. Ensure the tip of the frothed
milk dispensing tube is inside the cup.
4. Plug the appliance into the appropriate outlet.
5. Turn the switch o
n “I”.
Pressurized
funnel
1-cup filter 2-cup filter
Coffee
spoon