~ 11 ~
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate class indicated
on the rating plate of the appliance:
Climate class
Ambient temperature
SN
+10
o
C to +32
o
C
N
+16
o
C to +32
o
C
ST
+16
o
C to +38
o
C
T
+16
o
C to +43
o
C
Location
The appliance should be installed away from sources of heat such as radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the
appliance is positioned below an overhanging wall unit, the minimum distance between the top of the
cabinet and the wall unit must be at least 100 mm. Ideally, however, the appliance should not be positioned
below overhanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the
cabinet.
Warning! It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your
domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a
contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a
separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer
declines all responsibility if the above safety precautions are not observed. This appliance complies with the
E.E.C. Directives.
