Step 3: To Adjust Height of Handlebars
Handlebars should be set at wrist level to keep your back straight.
a. Remove star screw;
b. Extend handlebars up to desired height and align holes in tiller;
c.Tighten star screw securely.
Step 4: To Adjust Height of Knee Platform
Stand on your good leg, hold on to a steady surface for support, and bend the
leg that will be on the knee platform at a 90 degree angle.
Adjust the knee platform to meet the height of your bent leg. When you place
your bent leg on the knee platform, your uninjured foot should comfortably
reach flat on the floor, and your hips should be even. You should be in an
upright position as if you were standing normally.
a. Remove start screw;
b. Insert the knee platform post;
c. Extend the knee platform to desired height;
d. Then, insert star screw and tighten knob securely.
8
