P. 5
Brake cable
Cable adjuster screw
Cable adjuster lock nut
Inner brake cable wire
Anchor bolt & nut
Note: If additional brake adjusting is required, you can bring the brake rubbers closer to the
wheel rim by turning the adjusting screw counter-clockwise. To make the brake rubbers further
from the rim. Turn the adjusting screw clockwise.
Be sure the cable is locked securely through the anchor bolt. . Reset cable adjusting lock nut
when adjusting is final.
Wanting: If after brake adjustments are made and the hand brake still does not function. Then
have brake repaired or adjusting at a bicycles service shop. Do not ride if brake do not function
properly.
Before using pls check the following:
1. Make sure smoothly install and remove the front /rear wheel.(Tools:Hex Wrenches,Spline
End Wrenches or others)
2. Make sure head set are securely mounted, and steering smoothly.(Tools:Hex
Wrenches,Spline End Wrenches or others)
3. Make sure the handlebars are securely mounted.(Tools:Hex Wrenches)
4. Check that both handlebar grips are firmly fixed and brake lever correctly install.(Tools:you
can choose the tool which will match the brake.Hex Wrenches,Sockets Wrenches,or Screw
drivers)
5. Make sure properly functioning rear brake, check whether the brake pad overuse, and
whether brake cable tail up and rusty. (Tools:Hex Wrenches,Spline End Wrenches or others)
If you ride the scooter for long time, it is Inevitable that the tire be broken, pls find the specialty
to fill or replace the tire, and make sure the tire inflated.
Wheels and Bearings
It is the responsibility of the owner or guardian to periodically inspect the wheels for wear and
tear, the axle for proper tightness, and bearings for side-to-side play and loose parts. When a
wheel or wheel bearing develops play, this is an indication of excess wear and replacement is
necessary. Replace immediately with only genuine wheels.Wheels other than genuine wheels
may not be compatible with your scooter. The use of anything other than genuine
replacement parts may affect your safety.
Cleaning your Scooter
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as
they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners
as they may damage or dissolve the plastic components or soften the decals or decal adhesive.
How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced
cornering, lean slightly into the direction of the turn. For controlled stops, apply the brake by
stepping on the rear fender/brake.HOMCOM recommends that you practice applying the brake
at various speeds and in an open area free from obstructions before riding your scooter around
others.
