4
ASSEMBLY
REQUIREMENTS FOR MACHINE ASSEMBLY
-
Philips screwdriver; 1X7mm wrench
-
1X22mm wrench; 1X8mm wrench; 1X17mm wrench
-
2x10mm
wrenches
-
1 pair of work gloves
NOTE
:
The machine is supplied mostly assembled. Prior to use, the following items have to be fitted.
-
Stand-Switch-Dust collect-Saw blade-Rip fence
STAND ASSEMBLY
The four folded legs have been folded before shipment.
To assemble the stand:
- unfold the four legs and tighten the wing nuts securely
- insert the short crossbeams and tighten the Knurled nut
INSTALL DUST COLLECT
Attach the suction port with three taping screws ST3.5x13
and two pan head screw M4X8 as illustrated to the outside
of the chipcase.
SETTING SWITCH
Fit the switch on the front panel, using the two M4
self-Locking Nut & M4X60 screws.
To start =press green switch button
To stop =press red switch button
NOTE
: The carriage bolts must be positioned in
the groove to fasten through wing nut.
