Holzstar SAA 901, Руководство по эксплуатации, Страница: 10 / 18

10 SAA 901 | Version 1.01
Installation and connection
7.2 Set up the Chip Extraction Unit
Place the machine on a stable, level ground. The
distance to the wall should be min. 800 mm.
Check the data of electric connection.
Don´t expose the machine to moisture, rain or snow.
Carry out maintenance and servicing regularly.
7.3 Initial operation the Chip Extraction Unit
Schritt 1: Check whether of the extraction hose on to Ex-
traction Unit and the extraction adapter on the
woodworking machine are connected.
Schritt 2: Check whether the chip bag is good fixed.
Schritt 3: Switch on first the Chip Extraction Unit and
then only the woodworking machine.
Schritt 4: Before switch off the extraction unit, first switch
off the woodworking machine.
Schritt 5: Inspect regularly the chip bag and empty it if is
full.
Schritt 6: Before operating the on / off switch, make sure
that the filter bag is good fixed.
7.4 Electrical connection
In the follow Steps the Chip Extraction Unit can con-
nected to the electricity network:
Schritt 1: The Chip Extraction Unit must be off.
Schritt 2: The Chip Extraction Unit connect on 230 Volt
mains plug, with a minimum fuse of 10 A.
Schritt 3: Check, whether all protective devices are
mounted.
Schritt 4: Switch on the Chip Extraction Unit.
Schritt 5: Check, whether the direction of rotation of the
motor is correct.
ATTENTION!
Risk of injury through a non-stable adjusted machine!
Check the stability of the machine always after instal-
lation or maintenance.
Wear the safety gloves!
Wear the protective clothing!
Wear the safety shoes!
ATTENTION!
Observed on the good grounding of the
Extraction Unit!
Static electricity charge leads to
- Deposition of abrasive dust
- Rapid corrosion of the moving parts.
- Spark formation by discharge with explosion ha-
zard!
ATTENTION!
Danger to life due to electrical shock!
Danger of live through electric shock by contact with
live power components!
- The Chip Extraction Unit may connected only from
Qualified electrician.
- Work on the electrical system must execute only
from Qualified electrician.