Holzstar HBS 400, Руководство по эксплуатации, Страница: 3 / 18

DANGER! NEVER OPERATE A TOOL WHILE UN-
DER THE INFLUENCE OF DRUGS, MEDICATION, OR
ALCOHOL .
DANGER! ALWAYS WEAR PROPER APPAREL.
Never wear loose clothing or jewelry that might get caught
in moving parts. Rubber-soled footwear is recommended
for the best footing.
DANGER! ALWAYS USE SAFETY GLASSES.
Also use a face or dust mask if the cutting operation is
dusty.
DANGER! NEVER OVERREACH.
Keep your proper footing and balance at all times.
DANGER! ALWAYS DISCONNECT TOOLS
before servicing and when changing accessories such as
blades, bits, and cutters.
ALWAYS AVOID ACCIDENTAL STARTING.
Make sure switch is in “OFF” position before plugging in
cord.
NEVER LEAVE TOOLS RUNNING UNATTENDED.
DANGER! NEVER STAND ON TOOLS.
Serious injury could occur if the tool is tipped or if the
cutting tool is accidentally contacted.
DANGER! ALWAYS CHECK FOR DAMAGED PARTS.
Before initial or continual use of the tool, a guard or other
part that is damaged should be checked to assure that it
will operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other
damaged parts should immediately be properly repaired or
replaced.
2