Holzmann KAM 65PROSET, Руководство пользователя, Страница: 22 / 37

HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 22
KAM 65PROSET
10.1.3 Adjustment for rolling stopper pin
 Press the pin upwards and rotate the pin as shown in Fig. 8 &9. Once the pin is pushed down
and relocated, the surface on the different sides of the pin can stop the bearing from rotating
with the cutter at the same time.
10.1.4 Calibration for trimming thickness
 As shown in (Fig. 10), the motor can be rotated both ways and reached the desired thickness
for trimming. For every degree of 0.05mm, the router/cutter moves 2.0mm.
10.1.5 Operation
 Turn on ON-OFF-switch; hold the two knobs with both hands firmly; move along the panel for
edge trimming.
 When trimming thin spare edge band, remove the router bit shown in Fig 11&12.
，
trim the
edge by using two hands to hold up to each side of the router bit (Fig 13). Wear safety
gloves. Warning about cut injuries!