SAFETY GUIDELINES
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Seite 15
Heizkanone / gas burner HK 10 / HK 15
11
SAFETY GUIDELINES
11.1
Proper usage
Holzmann Maschinen cannot be held responsible for any injuries or damages if there was per-
formed manipulation or adjustments to the machine.
The following items are some rules about security which should be followed by everyone in
common when using dynamoelectric tools.
Please read them all very carefully before using such tools and then keep this manual after
reading.
You must absolutely follow these rules when using in case of fire, electrocuted, personal in-
jury and other accidents.
For another usage and resulting damages or injuries HOLZMANN MASCHINEN
doesn’t assume any responsibility or guarantees.
11.2
General rules of security
Keep the workshop clean: It’s easy to cause accidents if the workshop is in mess.
Notice working environment: Don’t let tools be damaged by wind or rain. Don’t work in
humid and darksome places. Don’t work in places with flammable gas or liquid.
In case of being electrocuted: Don’t make your body touch those grounded objects such as
conduit, caliduct, fridge when using dynamoelectric tools.
Don’t allow strangers and children to be close to the workshops:
Keep tools carefully: Unused tools should be kept in dry and high places where children’s
hands couldn’t reach to, please lock them if it’s necessary.
Don’t overload tools: Operate according to speed or load factor which has been labeled on
tools to get a better and safer effect.
Protect cables: Don’t lift tools with cables and pull cables to draw connector plugs from
switches. Cables should be put away from heat and oily liquid and be avoided to touch
sharp objects.
Fix workpiece: Please use clamps or table vices to clip workpiece before working, which is
safer than using hands; meanwhile, you can absolutely operate tools with your hands.
Maintain tools very carefully: Keep cleaning tools and their sharpness in order to make
them perform fully. Operators should lubricate and change accessories in time according
to the manual. Check cables and extended ones timely; change the cables if they are de-
stroyed. Clean handgrips of tools and keep them dry and from oil.
Cut off electric source in time: Keep the habit of cutting off electric source in time before
having a rest or changing accessories.
Outdoor extended cables: You should use regular extended cables for outdoors when
working outdoors.
Keep vigilance: Keep your brain sober when working. Don’t operate tools when feeling
tired.
Check broken parts and accessories: Operators should carefully check whether every part,
every accessory or every protecting equipment has been broken before intermittently us-
ing tools in order to decide whether such objects perform again. Check whether running
parts are normal and other condition which influences operation. Operators should go to
service centers to replace parts if they are destroyed unless these are other items in the
manual. Please make the technicians repair switches if they don’t work.
Содержание HK 10
Страница 25: ......
