CLEANING, MAINTENANCE, STORGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
38
HBS400
17.4.7
Cutting circular work
To cut round slices, use a circular
cutting device as shown in the
illustrations on the left and below!
17.4.8
Fixtures
Fixture without workpiece
Operator placing workpiece fixture
CLEANING, MAINTENANCE, STORGE, DISPOSAL
W A R N I N G
Handling the machine with the power supply on, may lead to serious injuries or even
death. Always disconnect the machine from the power supply before cleaning,
servicing or maintenance work and secure it against unintentional reconnection!
18.1
Cleaning
C A U T I O N
Never clean the band saw blade or the band saw rollers with a brush held in the hand
or with a scraper while the machine is running. Always wait until the machine has
come to a complete standstill!
N O T E
Wrong cleaning agents can attack the varnish of the machine. Do not use solvents,
nitro thinners, or other cleaning agents that could damage the machine's paint.
Observe the information and instructions of the cleaning agent manufacturer!
Regular cleaning is a prerequisite for the safe operation of the machine and its long service life.