Holzmann DSM 150PS, Руководство пользователя, Страница: 15 / 25

ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 15
DSM 150PS / DSM 200PS
11 ASSEMBLY
11.1 Power supply
A T T E N T I O N
When working with non-grounded machines:
Severe injury or even death may arise though electrocution!
Therefore : The machine must be operated at a grounded power socket
The connection of the machine to the electric power supply and the following checks have to be
carried out by a respectively trained electrician only.
1. The electronic connection of the machine is designated for operation with a grounded
power socket!
2. The connector plug may not be manipulated.
3. hemainssupplymust be securedwith16A:
4. If the connector plug doesn’t fit or if it is defect, only qualified electricians may modify or
re-new it!
5. The grounding wire should be held in green-yellow.
6. A damaged cable has to be exchanged immediately!
7. Check, whether the feeding voltage and the Hz comply to the required values of the ma-
chine. A deviation of feeding voltage of ±5% is allowed (e.g.: a machine with working
voltage of 380V can work within a voltage bandwidth of 370 till 400V.
8. Make surethata possibleextension cordisin good condition andsuitableforthe transmission
of power. Anundersizedcordreducesthe transmission of powerandheats up.
9. A damagedcable must bereplaced immediately
N O T I C E
Operation is only allowed with safety switch against
stray current (RCD max. stray current of 30mA)
N O T I C E
Useonlypermittedextensioncablewithcross-sectiontheone
in thefollowingtabledeclared.
Voltage Extension Cross-section
220 V-240 V
50 Hz
<27 m 1,5 mm 2
<44 m 2,5 mm 2
<70 m 4,0 mm 2
<105 m 6,0 mm 2
Plug 400V:
5-wire:
with
N-conductor
4-wire:
without
N-conductor