HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Strana 25
UNIVERZÁLNÍ PONORNÁ PILA / MINI PLUNGE SAW TAS 89M
•
•
The plug of an electrical tool must strictly correspond to the socket.
Do not use any adapters together with earthed electric tools
•
Each time you work with an electrically operated machine, caution
is advised! There is a risk of electric shock, fire, cutting injury;
•
Protect the machine from dampness (causing a short circuit)
•
Use power tools and machines never in the vicinity of flammable
liquids and gases (danger of explosion)
•
Check the cable regularly for damage
•
When working with the machine outdoors, use extension cables
suitable for outdoor use
•
Do not use the cable to carry the machine or to fix the work piece
•
Protect the cable from heat, oil and sharp edges
•
Avoid body contact with earthed
11.3
Remaining risk factors
W A R N I N G
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest
attention is required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk factors
totally. The following hazards may arise in
connection with the machine´s construction and design:
Despite of correct and proper use and maintenance there remain some residual risk factors:
•
Hazard of injury or machine damage due to undetected machine defect
To minimize this risk, check the machine prior to every operation for loose screws and
connections. Check the motor noise, the spindle, the drill chuck, etc. for eventual dam-age.
Damaged parts have to be replaced immediately, no operation of the machine in the
meantime!
•
Hazard of electric shock
Undetected malfunctions in the power supply and/or the connected wood working machine
might result in electric shock when touching the machine. Ensure proper electric installation,
and let it check periodically by a trained electrician.
•
Danger due to unintended machine start-up
Eliminate this risk by disconnecting the machine before you perform any checks or activities
on the machine.
•
Hazard of inhaling toxic dust
Especially wood dust arising from chemically treated wood and/or lacquer/paint are harmful
when inhaled. Therefore wear a suitable breathing mask if required.
•
Hazard of Kickback
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.
Содержание TAS 89M
Страница 41: ......
