HOLZMANN MASCHINEN HOB 410PRO, Руководство пользователя

Страница: 37 / 65

MAINTENANCE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 37
HOB 410PRO
14 MAINTENANCE
A T T E N T I O N
Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all
connecting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth band
guidance and a clean cut.
Store the machine in a closed, dry location.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
14.1 Maintenance plan
After each workshift:
Components To do
Machine complete

Remove all swarfs and dust from machine, especially from planer
and thicknessing tables
Blade shaft

Check the blades of wear and change if it necessary
Safety devices

Check covers for damage and tight fit

Check limit switch for safety shutdown and adjust if necessary

Check function of emergency switch
Monthly maintenance
The interval of maintenance depends on the mode of operation, however it should be performed
at least once a month:
 Unfold planer tables.
 Disassemble the cover.
No Components To do
Machine complete

General cleaning of housing and housing interior
1 Planer table
Thicknessing table
Mortising table

Cleaning of the surface

Apply the surface with lubricant
2 Power unit

Lubricating of drive chain and sprockets

Check the tension of the chain tensioner

Check the tension of the v-belt and tighten if it necessary
3 Feed and out feed rolls

Cleaning the rolls