HOLZMANN MASCHINEN FS160SOLID, Руководство по эксплуатации

Страница: 35 / 48

CLEANING, MAINTENANCE, STORGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 35
FS160SOLID
CLEANING, MAINTENANCE, STORGE, DISPOSAL
17.1 Cleaning
N O T E
Wrong cleaning agents can attack the varnish of the machine. Do not use solvents,
nitro thinners, or other cleaning agents that could damage the machine's paint.
Observe the information and instructions of the cleaning agent manufacturer!
Regular cleaning is a prerequisite for the safe operation of the machine and its long service life.
 Therefore, clean the machine after each use and remove any sawdust with a brush, broom
or vacuum cleaner.
17.2 Maintenance
W A R N I N G
Handling the machine with the power supply up can lead to serious injuries or even
death. Always disconnect the machine from the power supply before servicing or
maintenance work and secure it against unintentional or unauthorised reconnection!
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
 Before each operation, check that the safety devices are in perfect condition.
 Check the connections for tightness at least once a week.
 Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
17.2.1 Maintenance schedule
The type and degree of machine wear depend on the operating conditions. The following intervals
apply when the machine is used within the specified limits:
interval components activity
Before usage machine Cleaning the machine
Before usage machine Removal of all loose parts / tools
1 x week V-Belt tension Check and readjust belt tension if necessary.
1 x month Moving parts
Greasing / lubrication of guides / gear racks /
wheels
1x month break
Function test to determine that the spindles have
come to a standstill within the specified time (8-
10seconds).
1x month
Interlocked movable
guards
interlocked movable guards - by means of a
sequential opening of each guard to stop the
machinery and checking that it is not possible to
start the machinery with each guard open