HOLZMANN MASCHINEN FS160SOLID, Руководство по эксплуатации

Страница: 33 / 48

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 33
FS160SOLID
16.2 Operation
16.2.1 Starting the machine
1. Switch on the spindle by pushing ON-Button I (1).
2.
16.2.2 Stopping the machine
Normal Stopp:
Press the OFF-button (2). Motor stops.
16.2.3 Height adjustment spindle
Lose the fixing screw (1) and turn the handwheel (2) counter-clockwise to lift the spindle
upwards. Clockwise rotation lowers the spindle.
N O T I C E
With mounted tool and the maximum
rings removed, cutters can be
countersunk under the table up to a
maximum diameter (see technical data).
16.2.4 Spindle speed adjustment
N O T I C E
The cutting speed must be selected between 40m/s and 70m/s to reduce the risk of
kick-back. For this purpose, the speed diagram on the machine is used as a function
of the cutter diameter used.
1. Stop the machine
2. Open the door (1)
3. To change the spindle speed, release the locking handle (B) and release the belt tension
by moving the handle (A).
4. Set the belt to the desired speed position, consider the selection options according to
sticker (C) and technical data, as well as the valid speed range for the selected cutter
see table (D).
5. Then tension the belt again and fix the locking lever (B) to hold in place.