HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
19
EHH110
SAFETY
This section contains information and important notices for safe commissioning and handling of
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as possible damage to property and persons. Also
observe the symbols and pictograms used as well as the safety instructions and
hazard warnings!
11.1
Intended use of the machine
The machine is intended exclusively for the following activities:
The planing of wooden materials such as beam and boards amd also suitable for bevelling edges
and rebating within the specified machine limits.
HOLZMANN MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
11.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity:
max. 80 %
Temperature (for operation)
+5° C bis +40° C
Temperature (for storage and/or transport)
-20
° C bis +55° C
11.1.2
Prohibited Use / Forseeable Misuse
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine under explosive conditions
-
Operation of the machine in closed rooms without chip and dust extraction system.
-
Operating the machine outside the specified power range
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
-
Machining of materials with dimensions outside the limits specified in this manual.
-
Use of tools that do not meet the safety requirements of the standard for woodworking
machine tools (EN847-1).
-
Synchronous planing
-
Planing of strongly curved workpieces
The prohibited/hazardous use or disregard of the information and instructions presented in
this manual will result in the voiding of all warranty and damage claims against Holzmann
Maschinen GmbH.
11.2
User Qualification
Prerequisite for the use / operation of the machine is a corresponding physical and mental
aptitude as well as knowledge and understanding of the instruction Manual.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or carried out under the guidance and supervision of a qualified Electrician.