HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
Strana 31
D 510F
12.2
operation
12.2.1
Start / Stop
Start:
Press the green
˝I˝
button
Stopp:
Press the red
˝O˝
button
The speed is infinitely variable with the speed controllerset
With the switch left / right direction of rotation can be set.
NOTE:
ERROR - Codes on display are explained on page 36
12.2.2
setting the speed
ATTENTION
Off before conversion work machine and unplug the power cord!
By moving the belt in the headstock 3 speed ranges can be set.
In these areas, the speed after switching speed with the speed controller (
12
) is infinitely
variable.
Remove the cover (
A
) and the side cover (
B
) open bottom left of the drive motor.
The clamping lever (
C
) and turn the motor bracket (D) slightly.
The belt can be connected to the pulley (
E
) below and above 1,2 or 3 is set to the appropriate
position.
Push the correct insertion of the V-belt motor bracket (
D
) down and given a suitable belt
tension with the clamping lever (
C
) clamp.
The side cover (
B
) and cover (
A
) Close and secure.
icon image
Left / Right
Speed controller
Digital display
speed
ON / OFF
switch