Holy Stone HS720, Руководство пользователя, Страница: 13 / 48

-09-
• Return to Home (RTH)
Press the button to start the RTH, the transmitter makes a beep sound
and the drone will fly back to the recorded Home Point.
Press the RTH button again to exit RTH procedure and regain control of
the drone.
• Photo/ Video
• Speed Switch
Long press the button “ ” in the upper right corner, the LCD screen
showing “ ”, and you will hear a beep, which means the drone is at the
low speed.
Long press the button “ ” again, the LCD screen showing “ ”, and you
will hear two beeps, which means the drone is at the high speed.
• GPS Mode Switch
• Emergency Stop
Short press the button and the camera icon “ ” on the LCD screen
flashes once, the camera takes one photo.
Long press the same button, the video icon “ ” on the LCD screen
flashes slowly
the camera is taking video. Long press again will exit
shooting.
When turning on the transmitter, the default mode is the GPS Mode. Turn
off GPS by sliding GPS switch. Check the icon “ ” or “ ”on the LCD
screen to confirms GPS status.
Press and hold the button ” “ for 3 seconds, the motor will stop immedi-
ately.
Attention: The Emergency Stop function should only be use during
emergency to avoid any damage or injury.