background image

-29-

-30-

13.1 Waypoint Mode

13.2 Follow Me

When using Waypoint Mode, it is recommended to enlarge the 
map.

1

3

2

Draw the route

Delete

Submit

Point

This mode allows the drone to fly in a preset route according to the 
waypoints you have set. 
Tap the (        ) icon to enter the Waypoint Mode. Then tap (         )to 
select the way to take the point, and the operator can draw the 
flight path in the APP interface. 
Tapping (         ) can delete the waypoint you pinned down. When 
you have confirmed all the waypoints, tap (     ) to submit the 
confirmation.
Tap (        ) or (        ) to exit Waypoint Mode. You can also exit by 
pushing the throttle joystick.

DO NOT fly the drone towards people, animals, or small 

objects (e.g. tree branches and power lines) or transparent 
objects (e.g. glass or water).

There may be some deviation between the expected and 

actual flight path.

When the Follow Me function is enabled, the drone will follow the 
GPS in your smart phone to follow you wherever you go.

1. Ensure that the drone is flying at an altitude of more than 13.12 
feet (4 meters) and at a distance of more than 9.84 feet (3 meters);
2. Tap the (        ) icon on the APP interface to enter the Follow Me 
function, and the drone will now follow the phone’s coordinate.
3. You can tap (          ) or (          )  to exit the Follow Me function,  or 
you can exit by pushing the throttle joystick.

Common Issues :

Follow Me mode would be hard to activate if the phone’s GPS 

signal is too weak. This could be due to the signal loss from 
surrounding buildings, trees, or congestion from too many mobile 
phones in the area.

Use in an open area and be mindful of your surroundings. The 

drone is NOT equipped with obstacle avoidance.

Содержание HS165























Отзывы: