15
less than 10 km/hr or under the environment with tall buildings that the satellite signal is not good, it
is normal that the user may see the shift of the satellite coordinate while being in the static state.
=========================================================================
: Measure Distance Mode
Menu
: Go to Setting mode
Enter
: Start / Stop to measure distance
Note:
1.
When user enables the “Measure Distance” function, the “
” icon will shows on the top-left
corner of the screen.
2.
Because the satellite signal may be shifted easily due to the interference when the moving speed
is less than 10 km/hr or under the environment with tall buildings that the satellite signal is not
good, the user may see the shift of the satellite coordinate while being in the static state. Thus,
while the distance is being measured, it is normal that there might be accumulated error and the
displayed total measured distance will be different from the actual distance.
3.
You can select the unit in setting mode, refer to km/mile menu.
=========================================================================
: Setting Mode
Menu
: Go to Track Log Mode page
Enter
: Go to “Setting” menu of Setting mode
Menu
: Go to Distance By menu of Setting mode
Enter
: Go to select “Point” or “Route”
Note:
1.
“Distance By” signifies that Measure Distance is by “The beeline between Begin Point and End
Point” or by “Route (Path) of all points”.
Содержание M-241 Plus
Страница 22: ...21 Click Finish to exit the wizard ...