__
4 Sync GPS Device with PC
4.1 Application and functions
This software is developed for mobile device with WINCE platform to connect and
synchronize data with PC.
Copyright: This software is under copyright of Microsoft Corporation
4.2 Operating Environment
Hardware platform:
PIII hardware and above
Software platform:
Microsoft Windows 98/ME/2000/2003/XP
Requirements: This software is compiled by
Windows Install. Installation of this
software would require support of MSI service in your PC.
There are 2 mode of USB connection with PC, tap “Settings” and tap
to select
connection mode (as shown below).
Tap “Mass Storage” mode and tap
to save and exit.
“Mass Storage” mode - The device is connected to PC via USB cable to directly
access the content of SD card and FLASH memory in the device. The device is used
as a memory card reader;
“MS ActiveSync” mode - The device is connected to PC via USB cable which allows
the PC to synchronize information automatically with the device. MicroSD card
FLASH memory in the device can be accessed by PC.
If “MS ActiveSync” mode is selected, the follow the steps in next section to install
ActiveSync software.
.
29
