
iii
Safety Precautions
1.
Use the power adapter included with the package. Using other power adapters than the
one provided will result to malfunction and could prove to be dangerous.
2.
The device should only be used with the supplied batteries.
•
About the power adapter:
1.
Do not use the power adapter in a wet environment. When hands and feet are wet, do not
touch the power adapter.
2.
While using the power adaptor, ensure that the area is well ventilated. Do not let paper or
other material cover the power adaptor, as this will interfere with cooling. Do not use the
power adaptor whilst it is in a bag.
3.
Do not attempt to repair the device. If device is damaged or is in a wet environment,
replace the device immediately.
4.
It is not recommended to charge from a PC because the PC power voltage is not enough
to supply the device.
•
About the battery
1.
Use only the original factory approved power adapter.
2.
A Lithium battery is built into the device. To prevent fire or skin burns, do not disassemble,
pierce, impact, or expose the battery to fire. The battery will crack, explode, or release
dangerous chemicals if placed in a fire.
•
Important instructions
1.
Note: Replacing with an incorrect battery may result in an explosion. When disposing of
the battery, follow the instructions. The replacement battery must be a factory approved
original.
2.
Regulations must be observed when recycling or disposing of batteries.
3.
The battery should only be used in this device.
Содержание FUNTREK 130 -
