background image

205 Hardman Avenue South, South Saint Paul, MN  55075

Voice:  (800) 899-5444 • Fax:  (888) 552-8661

e-mail: [email protected]

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter 

®

 and Holtkötter Leuchten

®

 are registered trademarks of Holtkötter.  All Rights Reserved.

© Holtkötter

Halogen Torchiere

No. 2517*P1

Featuring “Dimm System Punkt 1” (Dimming System Point 1)

Congratulations, you have just purchased the leading-edge dimming technology from Holtkötter.  
We  have  specifically  designed  the  “Dimm  System  Punkt  1”  (Dimming  System  Point  1  (P1))  to 
provide specialized features for ease and convenience of use.

Features of the “Dimm System Punkt 1”

 

Point Dimming

 - the lamp may be 

turned  on  with  a  single  click  of  the  P1 
dimmer.  

 

 

Soft On

 - the lamp may be turned on with a 

single click of the P1 dimmer.  The lamp will 
come on low and continue to brighten to 
full brightness.  This allows the eye to adjust 
to a gradual increase in light.

 

Soft / Delayed Off 

- turn the lamp off with a 

single click of the P1 dimmer.  The lamp will 
dim to 60% brightness of the original setting, 
remaining briefly at that level to allow you 
to  exit  the  room;  then  the  lamp  gradually 
turns  itself  off.  This  “soft”  off  provides  a  few 
moments of light after turning the lamp off, 
rather than immediate darkness as is the 
case with other switches.

 

Dimming Cycle

 - to adjust the lamp to the 

perfect light level for any situation, press 
and  hold  the  P1  dimmer.  The  dimmer  will 
cycle through all dimming levels. When the 
lamp achieves the light level of your choice, 
release the P1 dimmer.  

 

Tilt Switch

 - a safety measure is provided with the “Dimm System Punkt 1”.  In the 

event that the lamp is tipped over, the tilt switch cuts off the power to the lamp.

Care Instructions

Use only a soft, dry cloth to clean.  If necessary, a slightly damp, soft cloth can be used to spot 
clean.  Do not use common household cleaners on lamps or fixtures, as the lacquer on the 
outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.

CAUTION, IMPORTANT SAFETY INSTRUCTIONS

This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to 
reduce the risk of electrical shock.  This plug will fit a polarized outlet only one way.  If the plug does 
not fit fully into the outlet, reverse the plug.  If it still does not fit, contact a qualified electrician.  
Never use with an extension cord unless plug can be fully inserted.  Do not alter the plug.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, 
ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV 
RADIATION OR INJURY TO PERSONS
WARNING - To reduce the risk of FIRE, ELECTRIC 
SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION 
OR INJURY TO PERSONS:

1.  Turn off power/unplug and allow to cool before replacing bulb.
2.  Bulb gets HOT quickly.  Contact only switch/plug when turning on.
3.  Do not touch hot lens, guard or enclosure.
4.  Do not remain in light if skin feels warm.
5.  Do not look directly at lighted lamp.
6.  Keep lamp away from materials that burn.
7.  Use only with a 100 Watt, G9 halogen bulb or smaller bulb.
8.  Do not touch the bulb at any time.  Use a soft cloth.  Oil from skin may damage bulb.
9.  Do not operate the portable luminaire with a missing or damaged guard, lamp containment 

barrier or UV filter.

SAVE THESE INSTRUCTIONS

Отзывы: