Holtkoetter 2517/1 P1 Series Скачать руководство пользователя страница 2

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH.
Final assembly by Holtkötter International, Inc. in South St. Paul, MN.

Holtkötter 

®

 and Holtkötter Leuchten

®

 are registered trademarks

of Holtkötter International, Inc.  All Rights Reserved.

© Holtkötter International, Inc.

HOLTKÖTTER

 INTERNATIONAL, INC.

www.holtkoetter.com

e-mail:  [email protected]

ASSEMBLY INSTRUCTIONS FOR

Torchiere No. 2517/1*P1

Please make sure that the following parts for your torchiere are enclosed:

Torchiere

1. 

Glass shade

2. 

Glass shield

3. 

Bulb:    150  Watt  Bayonet-Base  Halogen  Bulb  by  Osram 

4. 

Order Code:  9250*150-DC/FR

Install the Bulb

Be  sure  that  the  lamp  is  turned  off  and  unplugged  prior  to 
installation.  

Install the new bulb (G), being careful not to touch the bulb 
envelope with your bare hands.  Hold the bulb at the porcelain 
grip,  insert  it  into  the  socket,  push  it  down  slightly  and  turn  it 
clockwise.

Note  of  Caution:   

The  recommended  replacement  bulb  for 

this fixture is the 150 Watt Osram Bayonet Base Halogen bulb 
(frosted).  Use of other brands of unknown quality may cause a 
risk of overheating.
  

Install the Glass Shade (Diagram A)

Once the bulb is installed, the glass shade (F) can be installed. 

Prepare  the  torchiere  by  removing  the  following  parts  from  the 

1. 

fixture:

 

• 

Screw (A) 

 

• 

Silicone Ring (C) 

 

• 

Knurled Nut (D) and

 

• 

Washer (E).

Place the Glass Shade (F) onto the lamp.  Slide a washer (E) over 

2. 

each of the stems (H) and secure in place with a knurled nut (D).
Prepare the glass shield (B) by placing a screw (A) in each of the 

3. 

holes provided.  Slide a small silicone ring (C) over each screw to 
hold in place.  Place the glass shield over the fixture shiny side up.
Align the screws (A) in the glass shield with the stem of the lamp and 

4. 

screw into place.  Do not overtighten.

Replace the Fuse

An  integrated  fuse  to  protect  the  dimming 
circuit can be found in the base of the lamp.  
Please  check  the  fuse  first,  in  case  the  lamp 

does not come on.  A four (4) Amp replacement 

fuse  can  be  found  at  any  hardware  store  or 
Radio Shack store.

D

E

A

C

F

G

B

H

Отзывы: