Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH.
Final assembly by Holtkötter International, Inc. in South St. Paul, MN.
Holtkötter
®
and Holtkötter Leuchten
®
are registered trademarks
of Holtkötter International, Inc. All Rights Reserved.
© Holtkötter International, Inc.
ASSEMBLY INSTRUCTIONS FOR
HOLTKÖTTER
INTERNATIONAL, INC.
155 Hardman Avenue South, South St. Paul, MN 55075
fax: (888) 552-8661 • phone: (800) 899-5444
www.holtkoetter.com
e-mail: [email protected]
Torchiere No. 2517/1*P1
Featuring “Dimm System Punkt 1”
(Dimming System Point 1)
Congratulations, you have just purchased the leading-edge dimming technology from Holtkötter
International, Inc. We have specifically designed the “Dimm System Punkt 1” (Dimming System
Point 1 (P1)) to provide specialized features for ease and convenience of use.
Features of the “Dimm System Punkt 1”
Point Dimming
- the lamp may be turned on
with a single click of the P1 dimmer.
Soft On
- the lamp may be turned on with a
single click of the P1 dimmer. The lamp will
come on low and continue to brighten to
full brightness. This allows the eye to adjust
to a gradual increase in light.
Soft / Delayed Off
- turn the lamp off with a
single click of the P1 dimmer. The lamp will
dim to 60% brightness of the original setting,
remaining briefly at that level to allow you
to exit the room; then the lamp gradually
turns itself off. This “soft” off provides a few
moments of light after turning the lamp off,
rather than immediate darkness as is the
case with other switches.
Dimming Cycle
- to adjust the lamp to the
perfect light level for any situation, press
and hold the P1 dimmer. The dimmer will
cycle through all dimming levels. When the lamp achieves the light level of your
choice, release the P1 dimmer.
Tilt Switch
- a safety measure is provided with the “Dimm System Punkt 1”. In the
event that the lamp is tipped over, the tilt switch cuts off the power to the lamp.
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the outside
of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.
CAUTION, IMPORTANT SAFETY INSTRUCTIONS
This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to
reduce the risk of electrical shock. This plug will fit a polarized outlet only one way. If the plug does
not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE
UV RADIATION OR INJURY TO PERSONS
WARNING - To reduce the risk of FIRE,
ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE
UV RADIATION OR INJURY TO PERSONS:
Turn off power/unplug and allow to cool before replacing bulb.
1.
Bulb gets HOT quickly. Contact only switch/plug when turning on.
2.
Do not touch hot lens, guard or enclosure.
3.
Do not remain in light if skin feels warm.
4.
Do not look directly at lighted lamp.
5.
Keep lamp away from materials that burn.
6.
Use only with a 150 Watt, bayonet base halogen bulb or smaller bulb.
7.
Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
8.
Do not operate the portable luminaire with a missing or damaged guard, lamp containment
9.
barrier or UV filter.
SAVE THESE INSTRUCTIONS
