holthausen elektronik GmbH ESW-Compact-Alu Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 14

holthausen elektronik GmbH ESW-Compact-Alu Скачать руководство пользователя страница 3

holthausen

elektronik GmbH

Electronic Vibration Monitoring Unit
ESW

®

-Compact-Alu (hol610)

Important information

These operation instructions are to be read through completely and carefully heeded
before starting the device. Failure to heed or adhere can result in claims on
manufacturer’s liability becoming null and void for damages ensuing there from.

Manual action of any manner on the device – with the exception of proper procedures
and those described in these operation instructions – lead to forfeit of guarantee and
exclusion from liability.

The device is solely intended for the usage as described below. It is particularly not
intended for the direct or indirect protection of persons.

holthausen elektronik GmbH assumes no liability whatsoever as regards suitability for
some specific purpose.

If any question should remain open, please never hesitate to contact us.

holthausen elektronik GmbH

Wevelinghoven 38, 41334 Nettetal
Phone: +49 (0) 21 53 - 40 08, Fax: +49 (0) 21 53 - 8 99 94
Mail: [email protected]

3

«
1
2
3
4
5
...
»

Содержание ESW-Compact-Alu















Отзывы:

Нет отзывов