Rev. 1.00
10
�a� 1�� �01�
Rev. 1.00
11
�a� 1�� �01�
e-Link for 8-Bit MCU ICP User’s Guide
e-Link for 8-Bit MCU ICP User’s Guide
4. e-Link Switch and Indicators
•
Switch
The switch is used to reset the e-Link.
•
Indicators
Status: Yellow indicates that programming is OK and the power is connected
Flashing: OK or power on initial state
Continuously on: Represents the execution of “Tools” → “Power On” function
Error: Red indicates the programming is in a fail state
Flashing: Fail
Active: Blue indicates whether the programming is in Ready or Busy state
Continuously off: Ready
Flashing: Busy
5. e-Link Size
•
e-Link back and side dimensions (unit: mm)
Figure 12
•
e-Link back slot dimensions (unit: mil)
Figure 13
