Application Circuit
LED
BAR
Touch MCU
BS83B08A-3
Wheel Touch Key
Power supply
Circuit
Operation Manual
Plug the AC / DC adapter into the power socket
Connect the DC plug to the LED table lamp socket
Switch on the power, touch the base sense area and the LED table lamp will
light up, touch the
location for 2 seconds and the LED lamp will extinguish
Use a clockwise moving finger to adjust the illumination level, or directly touch
the required level position to adjust the illumination level to ones preference.
The illumination level is reduced in a converse operation.
The
symbol is the start touch position and moving in a clockwise direction
will increase the illumination level. Moving in an anti-clockwise direction will
reduce the illumination level.
Base USB terminal: other appliances, if connected to the USB port, and if not
exceeding 3W, can be used as a charging socket.