HOLT HI-3593 ARINC 429 3.3V, Руководство пользователя

Страница: 2 / 25

_____________________________________________________________________________________
AN ‐ 160 Rev. C HOLT INTEGRATED CIRCUITS
2
INTRODUCTION
The Holt HI ‐ 3593 ARINC 429 Evaluation Board can be used to evaluate most of the features of the HI ‐
3593 ARINC Dual Receiver and Single Transmitter IC. The HI ‐ 3593 features an on ‐ chip DC ‐ DC converter
which generates both +5V and ‐ 5V to supply the bipolar differential voltage levels needed to meet the
ARINC 429 Bus levels from a single 3.3V supply voltage. The main board “General Purpose SPI
Evaluation Board” includes switches, pushbutton switches and LEDs to help navigate the operating
modes and confirm data and status information. A Freescale MC9S12XDT512 microcontroller on the
main board communicates with the HI ‐ 3593 through the SPI interface. A Serial UART port is provided
which enables viewing messages and status information or entering of optional commands using any
terminal program such as Hyper ‐ Terminal. The HI ‐ 3593 Evaluation Board is a daughter card that plugs on
to the General Purpose SPI board via two 26 pin connectors.
This Users Manual provides a more detailed description of the evaluation board and demo program than
in the Quick Start Guide.
Kit Contents

Quick Start Guide.

General Purpose SPI Evaluation board and schematic.

HI ‐ 3593 Evaluation Board (daughter card) and schematic.

HI ‐ 3593 Data Sheet.

RS ‐ 232 9 Pin Serial Cable.

Demo Project compatible with Freescale™ CodeWarrior™.

This HI ‐ 3593 Users Guide.

HI ‐ 3593 Application Note.
Downloaded from
Arrow.com.
Downloaded from
Arrow.com.