Page 2
TYPE 1.0.0.4
-RF
Doorphone Adjustments and Programming
Instructions for E-10 and E-40 Doorphones
In certain noisy locations (traffic or wind), the microphone volume may need to be decreased. A symptom of this is one-way talk path, in which the distant party
cannot be heard over the speaker. A “
MIC VOL
” adjustment is provided on the doorphone for increasing or decreasing the microphone volume.
Microphone Volume
DIP
Position
Description
Switch
1
ON
Auto Answer - Doorphone answers when incoming call is detected.
2
ON
Call Timer - See E-10 manual for a description of this feature. Recommended setting is “ON”. This is the factory default.
3
OFF
Programming Mode - E-10 is factory pre-set, and normally does not need re-programming. Refer to E-10 manual
(Viking document which is included) for details
Holovision recommends the default settings on the dip switches. See the E-10 or E-40 manual for more information.
The “
SPKR VOL
” pot can be adjusted to increase or decrease the speaker volume to the desired level.
Speaker Volume
Dip Switch Settings
Operation Instructions
ANSWER A CALL FROM DOORBOX
When the phones ring, pick up a phone to be connected to the visitor.
ON ON ON
1 2 3
+
+
Spkr Vol
Mic Vol
Viking E-10
