Page 3
TYPE 6.4.0.5-RF
W-1000 Adjustments and Programming
In certain noisy locations (traffic or wind), the microphone volume may need to be decreased. A symptom of this is one-way talk path, in which the distant party cannot be
heard over the speaker. A “
MIC VOL
” adjustment is provided on the doorphone for increasing or decreasing the microphone volume.
Microphone Volume
The “
SPKR VOL
” pot can be adjusted to increase or decrease the speaker volume to the desired level.
Speaker Volume
The maximum number of rings can be adjusted using the DIP switches.
Maximum Number of Rings
O
N
1
2
+
+
+
Spkr Vol
Mic Vol
O
N
O
N
1
2
Sw 1 Sw 2 Max Rings
OFF OFF 2
ON OFF 3
OFF ON 10
ON ON 30
C-1000B Door Controller Programming
1
Disconnect the PHONE LINE INPUT.
2
Slide the TALK BATTERY switch to the ON position.
3
Move DIP SWITCH 2 from OFF to ON.
4
Connect a phone to terminals 4 & 5 - LINE OUT TO PHONES.
5
Pick up the phone (you will hear a double beep - indicating that you have accessed the PROGRAMMING MODE).
6
You can now Touch Tone program the features listed below. SEE HOLOVISION Programming NOTES.
7
When Finished, hang up and move DIP SWITCH 2 to the OFF position
8
Slide the TALK BATTERY switch back to the OFF position
9
Reconnect line to PHONE LINE OUT
Step
Action
The C-1000 controller is factory set to work right out of the box. If customization of
the default settings is required, see the steps listed below. Refer to the C-1000
manual for additional options
