Doorphone Adjustments and Programming
Page 6
TYPE 115
In certain noisy locations (traffic or wind), the microphone volume may need to be decreased. A symptom
of this is one-way talk path, in which the distant party cannot be heard over the speaker. A “
MIC VOL
”
adjustment is provided on the doorphone for increasing or decreasing the microphone volume.
Microphone Volume
The “
SPKR VOL
” pot can be adjusted to increase or decrease the speaker volume to the desired level.
Speaker Volume
The “
maximum number of rings can be adjusted using the DIP switches.
Maximum Number of Rings
Sw 1 Sw 2 Max Rings
OFF OFF 2
ON OFF 3
OFF ON 10
ON ON 30
1
Disconnect the PHONE LINE INPUT.
2
Slide the TALK BATTERY switch to the ON position.
3
Move DIP SWITCH 2 from OFF to ON.
4
Connect a phone to terminals 4 & 5 - LINE OUT TO PHONES.
5
Pick up the phone (you will hear a double beep - indicating that you have accessed the PROGRAMMING MODE).
6
You can now Touch Tone program the features listed below
Access Programming Mode (Local Access)
Step
Action
1
Make sure C-1000B is in Programmin Mode - See above
2
Program Strike 1 activation time as follows:
3
Enter time (seconds) followed by #01
4
Program Strike 2 activation time as follows:
5
Enter time (seconds) followed by #02
EXAMPLE: 05#01 programs Strike 1 for 5 seoncds
03#02 programs Strike 2 for 3 seconds
Program Gate Strike Relays
Step
Action
NOTE: Entering a time “00” sets time = 1/2 second Maximum time through programming = 9 seconds
