Do not use the tiller when tired. Never work with the crusher when
influence by alcohol, drugs or medicaments affecting the concentration
capability.
13. Refueling. Always switch the engine off before refueling. Open the tank
closure carefully for overpressure run out slowly and the fuel ejaculation is
prevented. When working with the tiller, the unit body temperature increased.
Let the unit cool down before refueling. Otherwise, the fuel could ignite and
persons get burnt. Beware of overfilling the tank. If there is a spill, remove it
and clean the unit. After finishing the refueling, make sure the screwed closure
is tight to avoid loosening in result of vibrations.
14. Watch out for any damaged parts. Inspect the machine before use. Are any
parts damaged? Ask yourself seriously when detecting slight damage whether
the machine will work perfectly and safely despite that. Watch out for proper
aligning and adjustment of any moving parts. Do the parts fit one in another
properly? Are the part damaged? Is everything installed as appropriate? Are
any other prerequisites of proper working in place? Damaged protective
devices etc. must be repaired or replaced by authorized entitles unless the
operation manual expressly says otherwise. Any defective switches must be
replaced at an authorized servicing centre. Do not use the machine if it cannot
be put on and off with the switch. When repairs are necessary, kindly turn to
your local servicing centre.
15. Switch the engine off before any adjustment and maintenance. That applies to
the blades replacement in the first place.
16. Use approved parts only. Use only identical spare parts for maintenance and
repairs. Request advice of an authorized servicing centre for this purpose.
2.1 Emergency Action
Apply the first aid adequate to the injury and get qualified medical assistance as
quickly as possible. Protect the injured person from more accidents and calm
him/her down.
2.2 Assigned Use
The unit is designed only for regular use in agriculture, forestry, and horticulture
and area treatment. The manufacturer should not be held liable for any personal
and material losses due to a failure to observe these rules.
