Trident HD Specimen Radiography System User Guide
Chapter 3: Components, Controls, and Indicators
MAN-05478-002 Revision 003
Page 19
3.4 How to Move the Console
Note
The power cord wraps on the back side of the console to provide safe storage of the
cord during console movement.
1.
Make sure that the computer system and console are completely turned OFF.
2.
Make sure that the power cord is unplugged and any network cables are
disconnected.
3.
Wrap the power cord on the cord management plate.
4.
Make sure all components and cables are in a safe position on the console.
5.
Position the Image Display monitor so that you have an unobstructed view while
pushing the console.
6.
Unlock the caster locks.
7.
Move the console by pushing the console handle.
8.
Lock the casters when the console is in the correct location.
3.5 How to Turn On the System and Log In
1.
Make sure the console casters are locked.
2.
Connect the system to power. If desired, connect the system to the network.
3.
Turn ON the system power switch on the back of the console.
Figure 7:
System Power Switch